Shipping Info

HOW TO SHIP YOUR ENGINE: Click here to read about how UPS ships your engine>>>

Any extra parts sent will be returned with your rebuilt motor. You will need to box your motor core in a thick box approximately 20x20x25 in size. Then stack the bottom with approximately 3″ of cardboard to keep it from breaking through. You may also use a plastic container to ship the engine.

***READ***

** PLEASE MAKE SURE YOU INCLUDE THE FOLLOWING IN A ZIPLOC BAG. **

BUYER PAYS FOR SHIPPING US THE GOOD CORE.

OPEN AND PRINT THIS FORM (click here) – SHIPPING INFO AND CUSTOMER INFO

For shipping purposes you need to keep the package under 150 pounds to ship UPS ground. 

A rhino 660 motor boxed is approximately 130 to 142 pounds. We sell many motors all over the United States and Canada; we do not ship motors until we receive your core first.

All motors are completely torn down, cleaned, and inspected for wear and damage. All worn and damaged parts are replaced with new factory parts. We replace all bearings, seals, gaskets, crankshaft, pistons, valves etc.. All cylinders are sleeved or bored no more than .5 mm. Heads are rebuilt and machined. We then ship the motor ready to be installed by the customer.

You must have a core that has a good rebuildable head, cylinder, and transmission. Broken cases with holes are okay on all rhino 660 and 700 motors. Broken cases and or cyl on the rzr 800 motors will have an extra charge. You will need to send all the bolts and parts to the motor core if it has been taken apart by another shop or customer.

If you are looking for a more competitive engine rebuild, please call and tell us what you are looking for. We have built many “race winning” engines and can do it for you.